Com/Rad now offers total flexibility in your Base Station / Repeater / Trunking applications. Channel ranges from 30 through 900 Mhz including 220 Mhz ( FM emission ) and 300 Mhz ( Eastern European - Warsaw  Pact etc. ) - Cross Band operation is easily configured

Total solutions for your band plans, serviceability, and physical space limitations / requirements

The Eclipse range of Base Stations, Repeaters and
RF Links use a modular design. This has been done
to offer the most flexible use of any unit for system
configuration. Using the 19" rack international
standard for construction means the units are easily
assembled into a format that meets customers
needs.

Based on the recognition of our customers
operational needs, the audio circuitry of the Eclipse
equipment has been designed to give an
unprecedented on air quality. This exceptional quality
has been confirmed by many mobile operators who
immediately recognize the Eclipse equipment
performance from that of other manufacturers.

19" Rack Mount 100 Watt Station
 

The Eclipse Receiver design incorporates specifications that comply with most of the worlds
differing specifications for Base Station / Repeater operation. Emphasis has been given to
sensitivity, selectivity, blocking and inter-modulation performance to ensure outstanding
operation in the most congested sites.

For interfacing with the vast array of associated equipment, Eclipse receivers have the
following interconnection features:

. 600 Ohm balanced or unbalanced outputs.
. High impedance output.
. Discriminator output.
. Direct Audio output.
. Opto coupled COS output.
. Either de-emphasis or flat audio response.
. Noise, Carrier, CTCSS or Fast Noise squelch operation.
. Internal monitor speaker standard.
. Built in diagnostics.






The Eclipse Transmitter / Exciter design incorporates specifications that comply with most of
the worlds differing specifications for Base Station / Repeater operation. Emphasis has been
given to high power outputs ranging from 1 - 25 Watts. With in built power amplifiers, these
units can be used as stand alone transmitters for lower power amplifications such as 25 Watt
Repeaters or as RF Links in the 2 - 5 Watt range.

In order to interface with a vast array of associated equipment, Eclipse transmitters / exciters
have the following interconnection features:

. 1 - 25 Watts output with internal low pass filter.
. 100 % Duty Cycle to 40C.
. 600 Ohm balanced or unbalanced inputs.
. High impedance input.
. External tone input.
. Test microphone input.
. External PTT input.
. Opto coupled loop keying input.
. Either pre-emphasis or flat audio response.
. Built in diagnostics.






The Eclipse Power Amplifier design incorporates specifications that comply with most of the
worlds differing specifications for Base Station / Repeater operation. Emphasis was given to
high power outputs 25 - 120 Watts.

Eclipse power amplifiers have the following features:

. 1 - 120 Watts output.
. 100 % Duty Cycle to 45C.
. Over temperature protection.
. Automatic power reduction with high VSWR.
. ALC power regulation circuitry.

More Information and Pictorial

Accessories

We welcome your inquiry or RFQ. Please click here for our interactive feedback form.

"WE EXPORT!"