ACCESSORIES

Power Supplies:
1) PS12 Linear Power Supply 15 Amp continuous, 20 Amp peaks.
2) SMPS12-2 Switch Mode Power Supply 35 Amps continuous.

. RF500-19
Eclipse 19" sub rack.
This sub rack is 13 Eclipse units wide and 4U high. Width of the Eclipse
modules ( UW ) are: Receiver 2UW, Transmitter / Exciter 2UW, Power
Amplifiers ( except PA501) 3UW, Linear Power Supply PS12 4UW, Switch
Mode Power Supply 2UW.

. FM-1
Fan Module. (See Downloads)
2U rack mounted fan module for cooling in hot environments with high duty
cycles.

. BC/CH-1
Battery Charger / Change Over: (See Downloads)
Trickle charge change over unit for use with the Eclipse power supplies. Has
auto change over to battery with mains failure, open collector output for
switching or alarm function.

Battery C/O

. SSASU
Solid State Antenna Switching Unit.
Electronic switching for simplex operation. Available for all models except 800
Series.

The N-Type adaptor is included for size comparison and is also a convenient
way to mount the Antenna Switch on to the exciter or power amplifier.

. DMTX
Digital Modulator Transmit.
Transmitter digital option card, allows the transmitter to be used for RS422
and TTL transmission, suitable for POCAG transmissions.

. DMRX
Digital Modulator Receive.
Receiver digital option card, allows Receivers to recover RS422 and TTL
transmissions. Ideal for use in links for paging applications.

. A & T INTERFACE
Alarm & Trunking Interface. (See Downloads)
Combines Receiver and Transmitter alarms to a common switched output.
Allows easy access to Rx and Tx input/ output connections via a DB25F
connector. Suitable for most popular protocols.

. EXREF-1
External Reference Card. (See Downloads)
Allows transmitter lock to external references.

HBT-1

. HBT-1
Heart Beat Timer. (See Downloads)
Automatically keys a transmitter ON and OFF in a continuous cycle. Both
ON and OFF times can be adjusted from a few seconds to several minutes.

. MEC-1
Module Extension Cable.
Extends the rack connector allowing Modules to be operated and adjusted
outside the sub rack frame.

. FM-2
Hand Microphone.
Test microphone for local control.

. THS-3
Techelp Software 3.
DOS version software, programming and service monitor functions.

. SM2000
Service Monitor 2000. (See Downloads for document)
Windows version software, programming and service monitor functions.

. TTC1-9/25
Test Cables, 9 or 25 pin. (See Downloads)
Test cable for THS-3 or SM2000.

. SP-1
Switch Panel.
BCD switching panel for multi-channel local switching.

. MG-1
Module Guide.
Module guide. Black plastic slide.

. MSG-1
Module Support Guides.
Support guides for heavier modules.

. RFPCB
Rack Frame Printed Circuit Boards.
PCBs that hold the mating Connectors for the modules on the sub rack
frame, Rx, Tx and PA/PS. Each kit contains 1 x PCB and 2 x Module Guides.

. BP-1,-2,-3,-4
Blanking Panels.
Eclipse blanking panels for unfilled sub rack Frame slots. Available in 1, 2, 3
& 4 UW sizes.

. Manuals
Full service manuals are available for each model.

. Training Manual (See Downloads)
Includes factory settings and typical applications configuration


We welcome your inquiry or RFQ. Please click here for our interactive feedback form.